| Bilco ScapeWEL
website
Basement window and code-compliant egress system
Installed by Under Construction, LLC - York, PA
website
September 2007
|

|
 |

|
 |
 |

|

|
 |

We ran into a rock ledge that had to be jacked out...
...for proper clearance for drainage stone backfill... |

|
 |

|

The opening is laid out, inside and out, then cut with
a diamond blade gas-powered demo saw. Lots of dust!
|

|

|
 |

The steel-reinforced concrete lintel is heaved into placed!
This one was actually two pieces so it was easier to handle.
|

Clean stone backfill for proper drainage.
The dirt is screened then used to "top off" the stone backfill.
|

The system is anchored to the basement wall and supported
from the bottom with blocks. Note the bracing to maintain
square while the stone backfill is shoveled in. |

|

Note the polycarbonate dome cover to keep out snow,
rain and large debris. It is not a security feature.
|

From the inside, lots of bright light and fresh air
through this code-compliant egress window system.
The window is ThermaStar by Pella
4' x 4', vinyl slider with screen.
website |

|
|